65 mL stainless steel grinding vial set, 2 1/4 in. (5.7 cm) diameter x 3 in. (7.62 cm) long. Grinding load 3–10 mL. Vial body and cap liner made of hardened 440C stainless steel. Set includes screw-on cap with O-ring, two 1/2 in. (12.7 mm), and four 1/4 in. (6.35 mm) stainless steel balls. Volume 65 mL; grinding load 3–10 mL; mixing load approximately 25 mL.
Features
- Ideal for grinding hard, brittle samples to an analytical fineness in the 8000M Mixer/Mill® and 8000D Dual Mixer/Mill®.
- Also useful for blending powders and mixing emulsions.
- High durability and efficiency with moderate resistance to abrasion.
- Resists chemical attack.
- Volume: 65 mL
- Recommended mixing load: 25 mL
- Recommended grinding load: 3-10 grams
- Suitable for slurry grinding.
- Typical composition: Major Elements – Fe, Cr; Minor Elements – Ni, Mn, S, Si
- Hardness: Mohs 5-5 ½; Rockwell – C 55-60
Specifications
| Diameter |
2 1/4 in |
| Height |
3 in |
| Sample Capacity - Grinding |
3 - 10 mL |
| Sample Capacity - Mixing |
25 mL |
| Typical Sample Size |
10 g |
| Durability |
High |
| Hardness |
Mohs 5-5 1/2, Rockwell C 55-60 |
| Major Elements |
Fe, Cr |
| Minor Elements |
Ni, Mn, S, Si |
| Resistance To Abrasion |
moderate |
| Slurry Grinding |
yes |
| Comparative Efficiency |
High |
Application notes and product literature may not be available for all SPEX SamplePrep accessories. Feel free to contact us at sampleprep@spex.com for help with your specific application or product needs.
MSDS may not be available for this product. Contact us if you would like to receive the MSDS for this product.