65 mL hardened steel grinding vial set. Vial is 2 ¼ in.diameter x 3 in. long (5.7 cm x 7.62 cm). Set includes a screw-on cap with O-ring, two ½ in (12.7 mm) and four ¼ in.(6.35 mm) steel balls. Grinding vial body and cap liner are made of hardened tool steel. Grinding balls are made of type 52-100 steel.
Features
- Ideal for grinding hard, brittle samples to an analytical fineness in the 8000M Mixer/Mill® and 8000D Dual Mixer/Mill®.
- Also useful for blending powders and mixing emulsions.
- Moderate resistance to abrasion.
- High durability and efficiency.
- Suitable for slurry grinding.
- Volume: 65 mL
- Recommended mixing load: 25 mL
- Recommended grinding load: 3 – 10 grams.
- Typical composition: Major Element – FeMinor Elements – Cr, Si, Mn, C
- Hardness: Mohs 5 ½ - 6; Rockwell – C 60-65
Specifications
Diameter |
5.7 cm |
Height |
7.62 cm |
Sample Capacity - Grinding |
3 - 10 mL |
Sample Capacity - Mixing |
25 mL |
Typical Sample Size |
10 g |
Durability |
High |
Hardness |
Mohs 5 1/2 - 6 , Rockwell C 60-65 |
Major Elements |
Fe |
Minor Elements |
Cr, Si, Mn, C |
Resistance To Abrasion |
moderate |
Slurry Grinding |
yes |
Comparative Efficiency |
High |
Application notes and product literature may not be available for all SPEX SamplePrep accessories. Feel free to contact us at sampleprep@spex.com for help with your specific application or product needs.
MSDS may not be available for this product. Contact us if you would like to receive the MSDS for this product.